HALF BEND RADIUS HOSES



Application:
Medium to high pressure hydraulic lines. Suitable for mpetroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water-glycol based fluids and air.

Special Features:
Very good flexibility. Highly flexible hose and very low bend radius than relevant standards EN 853 1SN, SAE 100 R1S-AT. ISO 1436 for reference. Very low MBR for short assembly length and very narrow installation.

Standards: EN 853 1SN, SAE 100 R1S-AT, ISO 1436 for reference

Dash DN Hose
ID
(Inch)		 Hose
ID
(mm)		 Braid
OD
(mm)		 Hose
OD
(mm)		 Maximum(W.P) Minimum(B.P) Min.Bend
Radius
(mm)		 Weight
/Meter
(Kg/mtr)
Mpa bar psi Mpa bar psi
-4 6 1/4 6.4 11.1 13.2 22.5 225 3263 90.0 900 13050 50 0.225
-5 8 5/16 7.9 12.7 15.0 21.5 215 3118 86.0 860 12470 58 0.275
-6 10 3/8 9.5 15.1 17.3 18.0 180 2610 72.0 720 10440 65 0.350
-8 12 1/2 12.7 18.3 20.6 16.0 160 2320 64.0 640 9280 90 0.410
-10 16 5/8 15.9 21.4 23.9 13.0 130 1885 52.0 520 7540 100 0.520
-12 19 3/4 19.0 25.4 27.6 10.5 105 1523 42.0 420 6090 120 0.645
-16 25 1 25.4 33.3 35.3 9.0 90 1305 36.0 360 5220 150 1.000


Standards: EN 853 2SN, SAE 100 R2S-AT, ISO 1436 for reference

Dash DN Hose
ID
(Inch)		 Hose
ID
(mm)		 Braid
OD
(mm)		 Hose
OD
(mm)		 Maximum(W.P) Minimum(B.P) Min.Bend
Radius
(mm)		 Weight
/Meter
(Kg/mtr)
Mpa bar psi Mpa bar psi
-4 6 1/4 6.4 12.7 14.9 40.0 400 5800 160.0 1600 23200 50 0.368
-5 8 5/16 7.9 14.3 16.7 35.0 350 5000 140.0 1400 20000 58 0.431
-6 10 3/8 9.5 16.7 19.1 33.0 330 4785 132.0 1320 19140 65 0.532
-8 12 1/2 12.7 19.8 22.1 27.5 275 3988 110.0 1100 15950 90 0.629
-10 16 5/8 15.9 23.0 25.3 25.0 250 3625 100.0 1000 14500 100 0.772
-12 19 3/4 19.0 27.0 29.6 21.5 215 3118 86.0 860 12470 120 0.920
-16 25 1 25.4 35.1 37.7 16.5 165 2393 66.0 660 9570 150 1.271